Kenwood NX-5200K3 Function Reference

Operating the transceiver
The following describes how to initiate an Individual Call in Individual Call Mode.
0
Initiating an Individual Call by list selection
1
Press the Individual, Individual + Status, or Individual + Short Message key.
The transceiver enters Individual Call Mode, and a selection screen for the Individual ID List will appear.
The
following operations are identical even if the transceiver enters Individual Call Mode by a user pressing the Menu
key or using the keypad.
2
Press the [ ] or [ ] key to select a Unit ID from the Individual ID List.
Refer to Common FUNC “Selecting or Clearing Data from a List” for
selection methods.
3
Initiating an Individual Call.
Press the PTT switch to initiate a Voice Call. The “ ” icon blinks, and the
display changes to “Individual” and the ID name of the target transceiver.
Press the Menu ([Q]) or [*] key to initiate a Paging Call.
If Individual Call Mode has been entered with “Individual + Status” or
“Individual + Short Message”, Status Mode or Short Message Mode is
entered by pressing the [F] key.
Note
The selection screen for the Individual ID List closes at the same time as
pressing
the PTT switch. If selecting an ID and sending an Individual Call
again, reexecute the operations from step 1.
12 : 34
A
M
Individual 0002
TRUCK 824
TRUCK 825
TRUCK 826
BackPage
Menu Zone +
Individual
TRUCK 824
12 : 34
A
M
0
Initiating an Individual Call using Manual Dialing
To initiate an Individual Call by directly entering a Unit ID, Manual Dialing needs to be enabled.
1
Press the Individual, Individual + Status, or Individual + Short Message key.
The transceiver enters Individual Call Mode, and a selection screen for the Individual ID List will appear.
The
following operations are identical even if the transceiver enters Individual Call Mode by a user pressing the Menu
([Q]) key or using the keypad.
2
Press the Function [ ] key.
The Unit ID entry display appears.
Individual
UID
Back
12 : 34
A
M
1 DMR CONVENTIONAL SYSTEM
1.5 Making an Individual Call
DMR FUNC (K, F)/Ver 2.20 18
CONTENTS INDEX

Kenwood NX-5200K3 Specifications

General

Brand	Kenwood
Model	NX-5200K3
Category	Transceiver
Language	English