Status Message on Data Zone-Channel
Status Message on Data Zone-Channel is
the function that allows the transceiver to automatically change the channel to
the Data Zone-Channel to send a Status Message in a DMR Conventional system.
The transceiver automatically changes the channel to the channel in a DMR Conventional system configured in Data Zone-
Channel (DMR) to send a Status Message. When the transmission ends, the transceiver restores the Zone-channel that
was used before sending the Status Message. Status Message on Data Zone-Channel can be used to send data using
a specific dedicated channel.
Note
This function is enabled if “Channel Table” is configured in Zone-channel Format by using KPG-D1/ D1N.
Configuration using KPG-D1/ D1N
0
Configuring Status
Message on Data Zone-Channel to be enabled or disabled (
Transceiver
Settings > Personal
> Personal Features > DMR Conventional > DMR)
0
Configuring Data Zone-Channel (DMR) (
Transceiver Settings > Personal > Personal Features > DMR
Conventional > DMR)
Status Message on Data System-Personality
Status Message on Data System-Personality is the function that allows the transceiver to automatically change the
channel to the Data System-Personality to send a Status Message in a DMR Conventional system.
The transceiver automatically changes the channel to the channel in a DMR Conventional system configured in Data
System-Personality (DMR) to send a Status Message. When the transmission ends, the transceiver restores the Zone-
channel that was used before sending the Status Message. Status Message on Data System-Personality can be used
to send data using a specific dedicated channel.
Note
This function is enabled if “Personality” is configured in Zone-channel Format by using KPG-D1/ D1N.
Configuration using KPG-D1/ D1N
0
Configuring Status Message on Data System-Personality (
Transceiver Settings > Personal > Personal
Features > DMR Conventional > DMR)
0
Configuring Data System-Personality (DMR) ( Transceiver Settings > Personal > Personal Features > DMR
Conventional > DMR)
1 DMR CONVENTIONAL SYSTEM
1.10 Sending and Receiving a Status Message (Status Call)
DMR FUNC (K, F)/Ver 2.20 46
CONTENTS INDEX
To Next Page
Loading...
Need help?
General
