22 ABS-N_ABJ-NM-BA-e-1715
Case 2: Weighing plate loaded
The gram display flashes for two minutes, followed by „PLS.CAL“.
Unload weighing plate. The gram display flashes again for 2 minutes; after that the
internal adjustment is started automatically. In order to ensure proper PSC
operation, prevent vibrations and air flow.
As soon as the display in grams reappears after completing adjustment via PSC, the
balance returns to weighing mode.
To prevent a start-up of adjustment during a measuring process, actuate the
ON/OFF button as soon as „PLS.CAL“ is displayed. The gram display flashes
again for two minutes, followed by „PLS.CAL“.
To Next Page
Loading...
