KERN ABS-N Series User Manual

ABS-N_ABJ-NM-BA-e-1715 45
11.5 Menu Lock
The menu setting operations can be locked so that the settings cannot be inadvertently
changed. This menu lock is set with the following procedure.
Either
 Switch-on power supply of the balance and wait until
„OFF“ is displayed
or
 Set balance into stand-by mode, see chpt. 10.2
or
Select menu item
1. Press MENU for 3 sec., the password inquiry appears.
2. Use the navigation keys ( ) to enter the password
see chpt. 3.1.1 „Numeric input“.
+
Standard password (factory setting): „9999“.
+ Change password, see following chapter
+ If a wrong password is entered, „ERR N“
will appear. Restart with step 1.
3. Confirm with TARE. The menu lock is enabled, the
symbol is activated. This is followed by a
reappearance of "oFF" or .
 In weighing mode the symbol shows the menu lock.
 If a menu item selection is attempted in locked status,
the message “LOCKED” appears and the menu
selection is not allowed. To deactivate menu disabled,
follow the sequence of operations below:
Remove the menu lock
 With indication “oFF” or „ “, repeat step 1 – 3

KERN ABS-N Series Specifications

General

Brand	KERN
Model	ABS-N Series
Category	Analytical Instruments
Language	English