KERN ABS-N Series - Remote Control Instructions

92 ABS-N_ABJ-NM-BA-e-1715
16.5 Remote control instructions
Command Function
D01 Continuous data output
D02 Continuous data output of stable weighing values
D03 Status of stability display is attached to the data in the
continuous output.
U: instable
S: stable
D05 Single output
D06 Automatic output
D07 Single output. Status of stability display is attached to the
data in the output.
U instable (only models ABS-N)
S: stable
D08 Single output with stable weighing value
D09 Cancel output
BREAK
Function as , see chpt. 3.1
Q
CAL
Function as , see chpt. 3.1
TARE
Function as , see chpt. 3.1
T
PRINT
Function as , see chpt. 3.1