KERN ABS-N Series User Manual

ABS-N_ABJ-NM-BA-e-1715 27
How to change settings
 Press TARE


 Press ON/OFF repeatedly or for 3 sec., the balance will
return into weighing mode
8.4 Balance identification no.
This setting is for the balance ID number that is output along with the adjustment report.
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until
„BAL.ID“ is displayed.
 Press TARE, the currently set ID no. is displayed
(factory setting 0000).
Enter balance identification no. (max. 4 characters)
 Enter the desired ID no. using navigation buttons (see
chapter 3.1.1 „Numeric input“).
 Press ON/OFF repeatedly or 3 sec., the balance will
return into weighing mode

KERN ABS-N Series Specifications

General

Brand	KERN
Model	ABS-N Series
Category	Analytical Instruments
Language	English