KERN ABS-N Series User Manual

82 ABS-N_ABJ-NM-BA-e-1715
16.3 Communication parameters
By calling-up a standard setting „MODE 1 - MODE 5“ all communication parameters
are already preset (see chpt. 16.3.1).
The subsequent standard setting must be selected according to the printer (details see
the following table).
In the menu item „MODE U“ all parameters can be set defined by user (see chpt.
16.3.2).
Standard
setting 1
Standard
setting 2
Standard
setting 3
Standard
setting 4
Standard
setting 5
User-defined
settings
Setting for
KERN –
YKB-01N
Menu
selection
MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 MODE U MODE U
Manufactu
rer
Shimadzu
(Standard)
Shimadzu
*
Mettler Sartorius A-D - -
Baud
Rate
1200 1200 2400 1200 2400
user-
defined
1200
Parity None (8) None (8) Even (7) Odd (7) Even (7)
user-
defined
None (8)
Stop bit 1 1 2 2 2
user-
defined
1
Hand-
shake
Hardware Hardware off Hardware off
user-
defined
off
Data
format
Shimadzu
Standard
Shimadzu
Standard
Mettler
Standard
Sartorius
Standard
A-D
Standard
user-
defined
DF.1
Separator C/R C/R C/R + L/F C/R + L/F C/R + L/F
user-
defined
C/R
*only if the balance can send a feedback to the PC (without error: OK [C/R], at error NG [C/R].

KERN ABS-N Series Specifications

General

Brand	KERN
Model	ABS-N Series
Category	Analytical Instruments
Language	English