KERN ABS-N Series - Page 128

32 ABS-N_ABJ-NM-BA-e-1715
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM“ is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „START“ is displayed. The current setting is marked
by the stability display ( ).
Set display type
 Acknowledge using PRINT, the current setting is
displayed.
 Use the navigation buttons ( ) to select the desired
setting, e.g. „SEM.AUTO“.
Weighing mode
display
All segments
 Confirm with TARE. The current setting is marked by the
stability display ( ).
Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.