52 ABS-N_ABJ-NM-BA-e-1715
12.4 Zero / tare timing change function
The zero / tare timing change function can be switched-on, when the „Auto
zero“ and the „Auto tare“ function are enabled.
1. Call up menu
Press TARE for 3 sec. in weighing mode.
2. Select function
Press the navigation buttons ( ) repeatedly
until „TARE.F“ is displayed.
Confirm with PRINT. The current setting is marked by the
stability display ( ).
With stability display ( ) Function turned on
Without stability display ( ) Function switched off
3. Enable/disable function
Press TARE
4. Return to weighing mode
Press ON/OFF repeatedly or for 3 sec.
To Next Page
Loading...
