ABS-N_ABJ-NM-BA-e-1715 65
Model
Serial no.
ID no.
prepared by
Weigh further components in the same way
During formulation weighing can be displayed at any time by pressing
MENU (for 3 sec.).
5. Complete formulation process
Press ON/OFF. When the symbol [G] is displayed, the
total weight (TOTAL) of all components is displayed and
edited to the printer.
When the symbol is displayed, the balance is ready
for further measurements.
6. Return to weighing mode
Press ON/OFF for 3 sec.
Printout example „GLP ON“ (KERN YKB-01N):
To Next Page
Loading...
