KERN ABS-N Series User Manual

ABS-N_ABJ-NM-BA-e-1715 79
4. Connect filter
 Press the navigation buttons ( ) repeatedly
until „NO.FIL“ is displayed. The current setting is marked
by the stability display ( ).
with ( ) Weighing value is filtered
without ( ) Weighing value is not filtered
 Change using TARE
5. Return to weighing mode
 Press ON/OFF repeatedly or for 3 s.
With activated menu setting „MANU“ (see step 3, with )
the indicator will appear.
With deactivated menu setting „MANU“ (see step 3,
without ) starts the continuous data output
automatically, step 7 is not applied.
6. Tare weighing container
 If necessary, place an empty container on the balance and tare it by pressing
TARE.
 Place weighed goods and wait until the stability display ( ) appears. The
weighing value is issued automatically.
7. Press PRINT (only with menu setting „MANU ON“)

The continuous data output starts, the indicator goes out.
8. Place goods to be weighed on balance
 Every display change is continuously issued,
(data issue interval approx. 100 msec).
Interrupt continuous data output
ON-OFF = interrupt
PRINT = restart

KERN ABS-N Series Specifications

General

Brand	KERN
Model	ABS-N Series
Category	Analytical Instruments
Language	English