Front Panel
https://www.ketron.it/images/ketron/Manuali_HTML/SD40/english/03_pannello%20frontale.htm[13/05/2020 16:57:20]
-
Potentiometer for Master Volume of SD 40
Finally, further towards the right you will find:
-
DATA/VALUE, this knob is also called Dial, and allows you
to select files and parameters and edit the values selected.
Next, you will find the following keys.
-
EXIT: Use to cancel an operation or escape from the current screen
and display the previous screen, or exit a folder and back root. This
button also support led of incoming activity on Midi In port.
-
ENTER /Page : Use to confirm different operations or enter the
folders selected
-
SAVE: Saves any modifications made on the instrument.
-
Midi Reset: Pressing Exit and Enter simultaneously SD 40 send a
Midi Reset (Reset all events and midi controller instantly).
-
MEDIA: Displays the memory devices installed on the instrument
or connected via the USB ports
-
MENU: Displays and provides access to all the sections of the
instrument
-
REGS: Provides access to the page for selection of Registrations, in
other words a page on which you may select the main user settings of the
instrument saved.
- VOICE: Press the key VOICE to access the mode which allows
you to select and manage the instrument sounds.
-
KEYB.CONTROLS: Allows to control several main feature
of instrument
-
SPLIT: Selecting this tab and pressing a note on the keybed, Split
area is determined from Lower section (left) to the Upper (right) of the
keyboard.
To Next Page
Loading...
