Utility
https://www.ketron.it/images/ketron/Manuali_HTML/SD40/english/78_utility.html[13/05/2020 17:12:44]
UTILITY
Here you will find utility information about your instrument:
Panel Reboot Application
Simultaneously pressing both the ARRA_A & Enter buttons will restart the SD40 without having to manually
switch off the instrument. This may be useful if any anomalies should occur.
Whole Disk Check
Pressing both the ARR_B & ENTER buttons simultaneously enables the SD40o to do a complete disk check. This
function takes quite some time and so the instrument should not be switched off during this procedure.
Once completed, the instrument will restart automatically.
Update Modeling Tab
Holding down the ARR_C + ENTER buttons together, then pressing Style, the User modeling tables will be
automatically be updated.
Midi
Midi Reset: Add Exclusive System message to perform Midi Reset
Here is the code F0 26 7B 39 05 00 F7 ( Hex ).
Style recall form external midi device
Add possibility to recall style on RX receive from external midi .
From Midi Keyboard Rx part : global or right
bank 40-49 selection for Factory family 40=ballad 41=pop etc.
pch = 0-127 select style Factory maxx. 128 styles
bank 50-59selection for User familY 50=ballad 51=pop etc.
pch = 0-127 select style User max. 128 styles
To Next Page
Loading...
