Style
https://www.ketron.it/images/ketron/Manuali_HTML/SD40/english/67_pattern_edit.html[13/05/2020 17:12:59]
-
: Put on SOLO selected track just to "ear" just only the desiderated track of the STYLE.
- PART LISTEN :Allows to hear selected timbre directly from keyboard
The bar below (1/8 in the case of the Style selected in picture) displays the length of the pattern in use. During
recording is displayed progressively just to indicate the state of recording.
If you want to create a STYLE from scratch We recommend that before you begin to plan as more precisely you can
the structure of the style you are going to record. The parameters of length, time signature are basic settings that
style needs to have the correct planning.
Links below describes all the features of the various menus available on EDIT PATTERN:
ARR.A: Allows selection for Arrangements Parts of STYLE (A/B/C/D / FILL / BREAK; INTRO END )
MAJ: Allows selection for programming selection of MAJ / MIN / 7TH mode of STYLE.
PARAMETERS: Allows selection of Global (or single) Parameters of STYLE.
QUANTIZE: Menu to apply Quantize of STYLE parts recorded
CONTROLS : Allows selection of Controls of STYLE.
VELOCITY OCTAVE: Allows selection of Dynamic ( velocity) and Octave parameter to apply on
selected track.of STYLE
COPY/EXPORT: Allows to COPY between single part of whole STYLE.
NEW STYLE: TAB which allows to initialize a STYLE for a completely new Recording
CLEAR: TAB to CLEAR single events or whole STYLE.
RECORD: Allows to RECORD selected part of STYLE
Important: RECORD mode affects on all available sections of PATTERN. Exception is done for the track AUDIO
DRUM Instead of Audio Drum you can use a conventional Drum Set.
Arranger Setting
To Next Page
Loading...
