Keysight E5260/E5270 Programming Guide, Edition 4 4- 69
Command Reference
Command Reference
37 : Returns the quasi-pulsed source settings:
BDM detection interval[,mode];
BDT hold time,delay time
[;BDV chnum,range,start,stop[,Icomp]]<CR/LF^EOI>
38 : Returns the digital I/O port information:
ERM input pin;ERC2,value <CR/LF^EOI>
39 : Not used.
40 : Returns channel mapping information:
If multiple channel numbers are translated to another numbers.
ACH actual,program
[;ACH actual,program]
:
[;ACH actual,program]<CR/LF^EOI>
If no channel number is defined by the ACH command.
ACH<CR/LF^EOI>
41 to 45 : Not used.
46 : Returns SMU measurement operation mode settings:
CMM chnum,mode
[;CMM chnum,mode]
:
[;CMM chnum,mode]<CR/LF^EOI>
47 to 49 : Not used.
50 : Returns the linear search measurement settings:
LSM abort,post;LSTM hold,delay;LSVM mode;
[;LGI chnum,mode,Irange,Itarget] or
[;LGV
chnum,mode,Vrange,Vtarget]
[;LSV chnum,range,start,stop,step[,Icomp]] or
[;LSI
chnum,range,start,stop,step[,Vcomp]]
[;LSSV
chnum,polarity,offset[,Icomp]] or
[;LSSI
chnum,polarity,offset[,Vcomp]]
<CR/LF^EOI>
To Next Page
Loading...
Need help?
General
