Keysight E5260/E5270 Programming Guide, Edition 4 4- 79
Command Reference
Command Reference
LSTM
The LSTM command sets the timing parameters for the linear search measurement.
If you do not enter this command, all parameters are set to 0.
Syntax LSTM hold,delay
Parameters hold : Hold time (in seconds) that is the wait time after starting the search
measurement and before starting the delay time for the first search
point. Numeric expression.
0 to 655.35 sec. 0.01 sec resolution.
delay : Delay time (in seconds) that is the wait time after starting to force a step
output value and before starting a step measurement. Numeric
expression.
0 to 65.535 sec. 0.0001 sec resolution.
Example
Statements
OUTPUT @E5270;"LSTM 5,0.1"
To Next Page
Loading...
Need help?
General
