1- 28 Keysight E5260/E5270 Programming Guide, Edition 4
Programming Basics
Data Output Format
F Channel number of the measurement/source unit. One character.
G Data type. One character.
F Explanation
A Channel 1.
B Channel 2.
C Channel 3.
D Channel 4.
E Channel 5.
F Channel 6.
G Channel 7.
H Channel 8.
V GNDU.
Z Status code for extraneous data in the channel. TSQ
command response or invalid data is returned.
G Explanation
V Voltage measurement data (Data).
v Voltage source setup data (Setup_data).
I Current measurement data (Data).
i Current source setup data (Setup_data).
T Time data (Time).
Z Invalid data is returned.
z
To Next Page
Loading...
