(Continued)
• Don’t clean the sensor using a win‐
dow
cleaner. The cleaner may
leave a light film which could inter‐
fere with sensor operation.
• If your vehicle has window tint or
other
types of metallic coating on
the front windshield, the Auto
light system may not work prop‐
erly.
High beam operation
To turn on the high beam headlamp,
push
the lever away from you. The lev‐
er will return to its original position.
The high beam indicator will light when
the
headlight high beams are switched
on.
To turn off the high beam headlamp,
pull the lever to you when the high
beam is on. The lever will return to its
original position.
To prevent the battery from being dis‐
charged, do not leave the lights on for a
prolonged time while the vehicle is not
on.
WARNING
Do not use high beam when there
ar
e other vehicles. Using high beam
could obstruct the other driver’s vi‐
sion.
To flash the headlights, pull the lever
towards
you. It will return to the nor‐
mal (low beam) position when released.
The headlight switch does not need to
be on to use this flashing feature.
Features of your vehicle
5-90
To Next Page
Loading...
