WINDSHIELD DEFROSTING AND DEFOGGING
Automatic climate control
system
To defog inside windshield
1. Set
the fan speed to the desired
position.
2. Select desired temperature.
3. Press the defroster button
.
4. The air conditioning will turn on ac‐
cording to the detected ambient
temperature and outside (fresh) air
position will be selected automati‐
cally.
If the air conditioning and outside
(fresh) air position are not selected
automatically, adjust the corre‐
sponding button manually. If the
position is selected, lower fan
speed is adjusted to a higher fan
speed.
To defrost outside windshield
1. Set
the fan speed to the highest
position.
2. Set
the temperature to the ex‐
treme hot position.
3. Press the defroster button .
4. The air conditioning will turn on ac‐
cording to the detected ambient
temperature and outside (fresh) air
position will be selected automati‐
cally.
Operation tips
• F
or maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set the
mode to the floor-defrost position.
• Before driving, clear all snow and ice
from the windshield, rear window,
outside rear view mirrors, and all side
windows.
• Clear all snow and ice from the hood
and air inlet in the cowl grill to im‐
prove heater and defroster efficiency
and to reduce the probability of fog‐
ging up the inside of the windshield.
5-119
5
Features of your vehicle
To Next Page
Loading...
