Power/Charge Gauge
The Power/Charge gauge shows the
ener
gy consumption rate of the vehicle
and the charge/discharge status of the
regenerative brakes.
• POWER :
It shows the energy consumption
rate of the vehicle when driving uphill
or accelerating. The more electric en‐
ergy is used, the higher the gauge
level.
• CHARGE :
It
shows the charging status of the
battery when it is being charged by
the regenerative brakes (decelerating
or driving on a downhill road). The
more electric energy is charged, the
lower the gauge level.
State of charge (SOC) gauge for
high voltage battery
• The
SOC gauge shows the charging
status of the high voltage battery. “0
(Low)” position on the indicator indi‐
cates that there is not enough ener‐
gy in the high voltage battery. “1
(High)” position indicates that the
driving battery is fully charged.
• When
driving on highways or motor‐
ways, make sure to check in advance
if the driving battery is charged
enough.
1. When
there are 2 gauge bars (near
the “0 (Low)” area) on the SOC
gauge, the warning lamp turns ON
to alert you of the battery level.
2. When the warning lamp turns ON,
the vehicle can drive an additional
20-30 km (12-18 miles) depending
on the driving speed, heater/air
conditioner, weather, driving style,
and other factors. Charging is re‐
quired.
Electric vehicle guide
1-50
To Next Page
Loading...
