EasyManua.ls Logo

Kia NIRO - To Turn off Manual Speed Limit Assist

Kia NIRO
574 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Mov
e the switch up (to RES+) or
down (to SET-), and release it at
the desired speed. Move the switch
up (to RES+) or down (to SET-) and
hold it. The speed will increase or
decrease by 5 km/h (3 mph).
Move the switch up (to RES+) or
down (SET-) and release it immedi‐
ately. The speed will increase or
decrease by 1 km/h.
The set speed limit will display on the
instrument cluster.
The set speed limit will be displayed.
To drive over the preset speed limit you
must
depress hard on the accelerator
pedal (more than approximately 80%)
until the kick down mechanism works
with a clicking noise. Then the set
speed limit will blink and chime will
sound until you return the vehicle
speed within the speed limit.
NOTICE
Depr
essing the accelerator pedal
less than approximately 50%, the
vehicle will not speed over the pre‐
set speed limit but maintain the
vehicle speed within the speed lim‐
it.
A clicking noise heard from the
kick down mechanism by depress‐
ing the accelerator pedal fully is a
normal condition.
To turn off Manual Speed Limit
Assist, do one of the following:
Pr
ess the CRUISE & SPEED LIMIT
MODE switch.
Turn the ignition off.
If you press the cancel O switch once,
the set speed limit will cancel, but it will
not turn the system off. If you wish to
reset the speed limit, move the switch
up (to RES+) or down (to SET-) to the
desired speed.
Driving your vehicle
6-78

Table of Contents

Other manuals for Kia NIRO

Related product manuals