(Continued)
• Smart Cruise Control system
should
not be used when the vehi‐
cle is being towed to prevent any
damage.
• Always set the vehicle speed under
the speed limit in your c
ountry.
• Unexpected situations may lead to
possible
accidents. Pay attention
continuously to road conditions
and driving even when Smart
Cruise Control system is being op‐
erated.
Set SCC Reaction
The sensitivity of vehicle speed when
following
the front vehicle to maintain
the set distance can be adjusted. Go to
the User Settings Mode (Driver Assis‐
tance) and select SCC Reaction. You
may select one of the three stages you
prefer.
• Slow:
Vehicle speed following the front ve‐
hicle to maintain the set distance is
slower than normal speed.
• Normal:
Vehicle speed following the front ve‐
hicle to maintain the set distance is
normal.
• Fast:
V
ehicle speed following the front ve‐
hicle to maintain the set distance is
faster than normal speed.
NOTICE
The last selected mode remains In
the system.
Vehicle to vehicle distance
setting
To set vehicle to vehicle distance:
This function allows you to program
the
vehicle to maintain relative distance
to the vehicle ahead without depressing
the accelerator pedal or brake pedal.
The vehicle to vehicle distance will au‐
tomatically activate when Smart Cruise
Control system is on.
Select the appropriate distance accord‐
ing to road conditions and vehicle
speed.
Each time the button is pressed, the
vehicle to vehicle distance changes as
follows:
Driving your vehicle
6-98
To Next Page
Loading...
