WARNING
n
Windshield heating
Do
not use the
position during
c
ooling operation in extremely humid
weather. The difference between
the temperature of the outside air
and the windshield could cause the
outer surface of the windshield to
fog up, causing loss of visibility. In
this case, set the mode selection to
the
position and fan speed con‐
trol to the lower speed.
Defogging logic (if equipped)
To reduce the probability of fogging up
the
inside of the windshield, the air in‐
take or air conditioning are controlled
automatically according to certain con‐
ditions such as
position. To cancel or
r
eturn the defogging logic, do the fol‐
lowing.
Automatic climate control system
1. POWER button in the ON.
2.
Press the defroster button (
).
3. While
pressing the air conditioning
button (A/C), press the air intake
control button at least 5 times
within 3 seconds.
The indicator on the air intake button
will blink 3 times. It indicates that the
defogging logic is canceled or returned
to the programmed status.
If the battery has been discharged or
disconnected, it resets to the defog
logic status.
Auto defogging system (if
equipped)
Auto defogging reduces the possibility
of
fogging up the inside of the wind‐
shield by automatically sensing the
moisture of inside the windshield.
This indicator illuminates when the au‐
to defogging system senses the mois‐
ture of inside the windshield and oper‐
ates.
If more moisture is in the vehicle, high‐
er steps operate as follow.
(For European region)
Step 1:
Blowing air flow toward the
windshield
Features of your vehicle
5-120