CRUISE CONTROL (CC)
1. Cruise indicator
2.
Cruise set indicator
Cruise Control system allows you to
program the vehicle to maintain a con‐
stant speed without depressing the ac‐
celerator pedal.
This system is designed to function
abov
e approximately 30 km/h
(20 mph).
WARNING
• If the cruise control is left on,
(cruise
indicator light is illumina‐
ted), the cruise control can be
switched on accidentally. Keep the
cruise control system off when
Cruise Control is not in use, to
avoid inadvertently setting a
speed.
• Use Cruise Control system only
when
traveling on open highways
in good weather.
• Do not use the cruise control when
it
may not be safe to keep the ve‐
hicle at a constant speed, for in‐
stance, driving in heavy or varying
traffic, or on slippery (rainy, icy or
snow-covered) or winding roads or
over 6% up-hill or down-hill roads.
• Pay particular attention to the
driving
conditions whenever using
Cruise Control system.
(Continued)
(Continued)
• Be careful when driving downhill
using
the cruise control system,
which may increase the vehicle
speed.
NOTICE
• During
normal cruise control oper‐
ation, when the SET switch is acti‐
vated or reactivated after applying
the brakes, the cruise control will
energize after approximately
3 seconds. This delay is normal.
• To activate cruise control, depress
the brake pedal at least once after
turning the ignition switch to the
ON position or starting the vehicle.
This is to check if the brake switch
which is important part to cancel
cruise control is in normal condi‐
tion.
Driving your vehicle
6-88
To Next Page
Loading...
