Driving your vehicle
1205
Forward Collision-Avoidance Assist (FCA) (Sensor
fusion)
Stopping vehicle and ending brake
control
䳜 When the vehicle is stopped due
to emergency braking, the 'Drive
carefully' warning message will
appear on the cluster.
For your safety, the driver should
depress the brake pedal immedi
-
ately and check the surroundings.
䳜 Brake control will end after the
vehicle is stopped by emergency
braking for approximately 2 sec
-
onds.
Junction Turning function
Function warning and control
Junction Turning function will warn
and control the vehicle depending on
the collision level: 'Collision Warning',
'Emergency Braking' and 'Stopping
vehicle and ending brake control'.
Collision warning
䳜 To warn the driver of a collision,
the 'Collision Warning' warning
message will appear on the clus
-
ter, an audible warning will sound
and the steering wheel will
vibrate.
䳜 The function will operate when
your vehicle speed is between
approximately 10 ~ 30 km/h (6 ~
19 mph) and the oncoming vehicle
speed is between approximately
30 ~ 70 km/h (19 ~ 44 mph).
䳜 If 'Active Assist' is selected, brak
-
ing may be assisted.
To Next Page
Loading...
