151
5
5
Driving your vehicle Safe Exit Warning (SEW)
Warning timing
With the ENGINE START/STOP but
-
ton in the ON position, select 'Driver
Assistance → Warning Timing' from
the Settings menu to change the
initial warning activation time for
Blind-Spot Safety system.
When the vehicle is first delivered,
warning timing is set to 'Normal'. If
you change the warning timing, the
warning time of other Driver Assis
-
tance systems may change.
Warning volume
With the ENGINE START/STOP but
-
ton in the ON position, select 'Driver
Assistance → Warning Volume' from
the Settings menu to change the
warning volume to 'High', 'Medium',
'Low' or 'Off' for Blind-Spot Safety
system.
However, when Warning Volume is
turned off, the steering wheel
vibration function will turn on if it
was turned off.
If you change the warning volume,
the warning volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Safe Exit Warn
-
ing.
䳜 Even though 'Normal' is selected
for warning timing, if the vehicles
approaches at high speed from
the rear, the initial warning acti
-
vation time may seem late.
䳜 Select 'Late' for warning timing
when traffic is light and when
driving speed is slow.
If the engine is restarted, Warning
timing and Warning volume will
maintain the last setting.
To Next Page
Loading...
