Kikusui PCR 2000M - Page 43

PCR-M 43
Chapter 3 Operation
Switching the display
Table 3-6 shows how to switch to the measured value display from other setting
displays.
Table 3-6 Switching to measured value display
Other Setting Display Switching Procedure
Voltage setting display (V key illuminated) Press the V key.
Frequency setting display (F key illuminated) Press the F key.
Limit setting display (LIMIT key illuminated) Press the I key.
Configuration setting display
Memory storage display (MEMORY LED
illuminated)
Memory recall display (MEMORY LED blinked)