4 PCR-M
Safety Precautions
The following safety precautions must be observed to avoid fire hazards, electric
shock, accidents, and other failures. Keep them in mind and make sure to observe
them.
Using the product in a manner that is not specified in this manual may impair the
protection functions provided by the product.
Users
• This product must be used only by qualified personnel who
understand the contents of this operation manual.
• If unqualified personnel is to use the product, be sure the product is
handled under the supervision of qualified personnel (those who have
electrical knowledge). This is to prevent the possibility of personal
injury.
Purpose of
use
• Never use the product for purposes other than the product's intended
use.
• This product is not designed or manufactured for general home or
consumer use.
Input power
• Use the product within the rated input power voltage range.
• For applying power, use the power cord provided. For details, see the
respective page in this manual.
• This product is designed as an equipment of IEC Overvoltage
Category II (energy-consuming equipment supplied from the fixed
installation).
Cover
• Some parts inside the product may cause physical hazards. Do not
remove the external cover.
Grounding
• This product is an IEC Safety Class I equipment (equipment with a
protective conductor terminal). To prevent the possibility of electric
shock, be sure to connect the protective conductor terminal of the
product to electrical ground (safety ground).
!
Operation
M
an
ual
Line
Voltage
G
N
L
To Next Page
Loading...
