PCR-M 5
Installation
• This product is designed for safe indoor use. Be sure to use it indoors.
• When installing this product, be sure to observe the description in
section 2.2, “Precautions Concerning Installation Location” in this
manual.
• When connecting the power cable to a switchboard, be sure the work
is performed by a qualified and licensed electrician or is conducted
under the direction of such a person.
Relocation
• Turn off the POWER switch, and disconnect all cables before
relocating the product.
• When relocating the product, be sure to include the manual.
Operation
• Before using the product, be sure to check the input power voltage
and that there is no abnormality in the appearance of the power cord.
Be sure to remove the power plug from the outlet before checking it.
• If a malfunction or abnormality is detected on the product, stop using it
immediately, and remove the power plug from the outlet. Make sure
the product is not used until it is completely repaired.
• Use cables or wires with sufficiently large current capacity for output
wires and load cables.
• Do not disassemble or modify the product. If you need to modify the
product, contact your Kikusui distributor/agent.
Maintenance
and
inspection
• To prevent the possibility of electric shock, make sure to unplug the
power plug before carrying out maintenance or inspection.
• Do not remove the external cover during maintenance or inspection.
• To maintain the performance and safe operation of the product, it is
recommended that periodic maintenance, inspection, cleaning, and
calibration be performed.
Service
• Kikusui service engineers will perform internal service on the product.
If the product needs adjustment or repairs, contact your Kikusui
distributor/agent.
Check?
To Next Page
Loading...
