BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 51 of 91
Function: returns the firmware version of the node.
9.5.4. GetCrashInfo
Function: It reads the information stored in the non-volatile memory after an exception
has been generated.
9.5.5. ClearCrashInfo
Instruction
OP 0x0E
NA 0x0000
ARG None
Response
OP 0x0E
NA 0x0000 or 0x0014
ARG If 0 arguments, there is no available information.
If 20 arguments:
Bytes 1..20: information for Kimaldi Electronics.
Instruction
OP 0x0F
NA 0x0000
ARG None
Response
To Next Page
Loading...