Kimaldi BioMax2 - Sensor Database Management; Add User; Request Number of Users

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 70 of 91
10.3. Sensor database management
10.3.1. Add user
Function: It allows for a user's biometric information to be registered in the sensor’s
database, as well as in BiomaxPlus-DB if installed.
10.3.2. Request number of users
Function: it returns the number of users stored in the sensor’s database.
Instruction ‘564nnnnnnnnnn0000000000t’ - ExtraData: “hhh...hhh”
Description ‘564’ Instruction code.
‘nnnnnnnnnn’ User identifier.
‘0000000000’ Reserved.
‘t’ Template destination. Possible values:
‘1’, ‘2’, ‘3’ - Send template to Main FIM (‘1’), to
Auxiliary FIM (‘2’) or to both (‘3’).
‘hhh...hhh’ Biometric information of the user to be registered.
Only used where ‘t=1’, ‘t=2’, ‘t=3’.
This information travels through the Extra-data field
of the frame and has been previously captured
through ‘713’ command.
Response ‘664rr’
Description ‘664’ Response code
‘rr’ Operation result. Possible values:
11 - Operation completed correctly.
Instruction ‘715’ / ‘725’
Description ‘715’ Instruction code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
No argument
Response ‘815nnnn’ / ‘825nnnn’
Description ‘815’ Response code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘nnnn’ Number of users stored in the sensor’s database.