BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 73 of 91
Function: it allows for a user whose biometric information is stored in the sensor’s
database to be identified. That is, the user’s scanned fingerprint is compared against all
templates in the FIM module’s database. The matching template has an identifier (FP-ID)
that is returned to the Host.
10.4.3. 1:1 Identification
Function: it allows for a user whose biometric information is stored in the sensor’s
database to be identified. In 1:1 identification, the user’s scanned fingerprint is compared
against one single template, that corresponds to the provided FP-ID. The matching result
(true or false) is returned.
Instruction ‘716nnnnnnnnnn’ / ‘726nnnnnnnnnn’
Description ‘716’ Instruction code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘nnnnnnnnnn’ User’s identifier (FP-ID)
Response ‘816rrqq’ / ‘826rrq’
Description ‘816’ Response code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘rr’ Operation result. Possible values:
11 - Correct identification
‘qq’ Reserved for future use.
- Default value: ‘FF’
To Next Page
Loading...