Kimaldi BioMax2 - Factorycfg

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 54 of 91
Function: It writes an IP configuration parameter, storing it in the non-volatile memory.
See chapter 8.: “BioMax2 / KBio2-Online electronics configuration” .
9.6.5. FactoryCFG
Function: It restores the initial factory configuration, which is made up of two parts (see
chapter 8 ): IP parameters.
ARG Byte 1: IP parameter number (see section 8.2)
Byte 2. n : parameter value
Response
OP 0x0D
NA 0x0001
ARG Byte 1: IP parameter number (see section 8.2)
Instruction
OP 0x08
NA 0x0000 or 0x0001
ARG Byte 1: 0x00: machine parameters
0x01: IP configuration
> 0x01: machine parameters
If NO = 0, this is equivalent to byte 1 = 0x00 (machine parameters)
Response
OP 0x08
NA 0x0000
ARG None