Kimaldi BioMax2 - Switch Led;Beeper; Close Relay

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 57 of 91
9.6.8. Switch Led/Beeper
Function: This switches one of the LEDs or the beeper on or off.
9.6.9. Close Relay
Instruction
OP 0x31
NA 0x0002
ARG Byte 1: 0x00: Green LED
0x01: Red LED
0x02: external beeper
0x03: internal beeper
Byte 2: 0x00: off.
<>0x00: on
Response
OP 0x31
NA 0x0000
ARG None
Instruction
OP 0x40
NA 0x0002
ARG Byte 1: relay number to be enabled (from 0 to 3 in DB module)
Byte 2: enabling time 0x00 to 0xFE tenths of second
Response
OP 0x40
NA 0x0000
ARG None