Kimaldi BioMax2 - User Identification; Instant Matching; 1:N Identification

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 72 of 91
10.4. User identification
10.4.1. Instant Matching
Function: the user’s finger is scanned, and the retrieved template is compared against the
information provided by the same instruction.
10.4.2. 1:N Identification
Instruction ‘71700’ - ExtraData: “hhh...hhh” /
‘72700’ - ExtraData: “hhh...hhh”
Description ‘717’ Instruction code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘hhh...hhh’ Biometric information to use in the comparison.
Response ‘817rrqq’ / ‘827rrqq’
Description ‘817’ Response code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘rr’ Operation result. Possible values:
00 - Incorrect matching
11 - Correct matching.
‘qq’ Reserved for future use.
- Default value: ‘FF’
Instruction ‘716’ / ‘726’
Description ‘716’ Instruction code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
No argument
Response ‘816rrqqnnnnnnnnnn’ / ‘826rrqqnnnnnnnnnn’
Description ‘816’ Response code. Intermediate digit addresses Main
FIM (‘1’) or auxiliary (‘2’).
‘rr’ Operation result. Possible values:
11 - Correct identification
‘qq’ Reserved for future use.
- Default value: ‘FF’
‘nnnnnnnnnn’ User’s identifier (FP-ID)