Kimaldi BioMax2 - Specific Biomax2;Kbio2-Online Instructions; Readcfg_Byte; Writecfg_Byte

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 52 of 91
Function: It deletes the information stored in the non-volatile memory after an exception
has been generated.
9.6. Specific BioMax2/KBio2-Online instructions
9.6.1. ReadCFG_Byte
Function: It reads the value of a configuration parameter stored in the non-volatile
memory. See
chapter 8.: “BioMax2 / KBio2-Online electronics configuration” .
9.6.2. WriteCFG_Byte
OP 0x0F
NA 0x0000
ARG None
Instruction
OP 0x0A
NA 0x0001
ARG Byte 1: configuration parameter number (see section 8.1)
Response
OP 0x0A
NA 0x0002
ARG Byte 1: configuration parameter number (see section 8.1)
>Byte 2: parameter value
Instruction
OP 0x0B
NA 0x0002
ARG Byte 1: configuration parameter number (see section 8.1)
Byte 2: parameter value