Kimaldi BioMax2 - Readcfg_Ip; Writecfg_Ip

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 53 of 91
Function: Writes configuration stored in non-volatile memory. See chapter 8.: “BioMax2
/ KBio2-Online electronics configuration”
.
9.6.3. ReadCFG_IP
Function: It reads the value of an IP configuration parameter stored in the non-volatile
memory. See
chapter 8.: “BioMax2 / KBio2-Online electronics configuration” .
9.6.4. WriteCFG_IP
Response
OP 0x0B
NA 0x0001
ARG Byte 1: configuration parameter number (see section 8.1)
Instruction
OP 0x0C
NA 0x0001
ARG Byte 1: IP parameter number (see section 8.2)
Response
OP 0x0C
NA > 0x0001
ARG Byte 1: IP parameter number (see section 8.2)
Byte 2. n : parameter value
Instruction
OP 0x0D
NA > 0x0001