Kimaldi BioMax2 - Error Codes; Encapsulate GCR

BioMax2 / KBio2-Online
Installation and Programming Manual
www.kimaldi.com Page 67 of 91
9.6.25. Encapsulate GCR
Function: it encapsulates instruction frames in GCR format (Kreta-Classic format).
These GCR instructions allow you to address the DB and UI modules separately and to
implement the different FingerVein sensor identification functions (see chapter 10.:
“Biometric identification”
for further details).
9.7. Error Codes
BioMax2 / KBio2-Online electronics can also respond to any of the instructions it is sent
with one of the following codes:
• OpCode 0xFD: Frame Delay (resend later).
• OpCode 0xFE: Frame Error (badly-composed frame or argument out of range).
• OpCode 0xFF: Instruction Error ( invalid OpCode).
Instruction
OP 0xBD
NA 0x0003 or above
ARG See section 10.1
Response
OP 0xBD
NA 0x0005 or above
ARG See section 10.1