5.1.8. Select the alarm sound
“Setting > Instrument” screen is displayed.
➢ Go to “Audio” with the keypad then press OK.
➢ Press again OK
➢ Select with the keypad the Alarm 1 sound or the Alarm 2 sound then press OK.
5.1.9. Activate or deactivate Bluetooth
®
function (optional)
Bluetooth
®
allows to set and transfer data from a computer to the analyser or vice versa.
“Setting > Instrument” screen is displayed.
➢ Go to “Bluetooth” with the keypad.
➢ Press OK to activate it: ON or to deactivate it: OFF.
The icon appears on the instrument screen when it is activated.
When Bluetooth
®
is activated, Kigaz appears with the name “Kigaz” in the available devices list of the computer, tablet or
smartphone.
5.2. Set the combustible
15 different combustibles are recorded in the analyser:
Sahara / Fos Natural gas Cannel-coal
Groninguen – Natural gas Low volatile coal
Russia – Natural gas Coke gas
Propane Biofuel 5%
LPG Wood 20%
Butane Hog fuel 21%
Light oil Pellet 8%
Heavy fuel oil
5.2.1. Modify a combustible
Each combustible has its own coefficient allowing to calculate losses and efficiencies in the most accurate way.
The modification of these coefficients will lead some modifications in combustion analysis results. Only a
qualified technician is authorized to modify them.
It is still possible to reset the factory parameters pressing the “Factory parameters” function key or with the
LIGAZ-2 software (see page 55).
“Setting” screen is displayed.
➢ Go to “Combustibles” with the arrows then press OK.
➢ Go to the required combustible with the up and down arrows then press OK.
➢ Go to the coefficient to modify with the up and down arrows then press OK.
The keyboard is displayed.
➢ Select the numbers with the arrows and press OK to validate.
The analyser backs to the combustibles list.
• To go from lower-case keyboard to upper-case keyboard then to numeric keyboard: press the “A a 1” function key.
• To erase a letter: press the “Delete” function key.
It is also possible to modify the name of a combustible and its type of energy (solid, liquid or gas):
“Setting > Combustibles” screen is displayed.
➢ Go to the combustible to modify with the up and down arrows then press OK.
➢ Press the “Modify” function button.
➢ Press OK on the “Name” line.
The keyboard appears.
➢ Select the letters with the direction arrows and press OK to validate.
➢ Press the “OK” function key to validate the new combustible name.
➢ Press OK on the “Energy” line.
➢ Select the combustible energy type: solid, liquid or gas and press OK.
➢ Press the “Save” function key.
The instrument backs to the combustible list with the modifications applied.
Set the different parameters of the analyser 19
To Next Page
Loading...
