Kimo KIGAZ 210 - Manage Customers; Manage a Customer; Modify a Customer; Delete a Customer

6. Manage customers
It is possible to save names and addresses of different customers in the analyser. The performed measurements could be
assigned to them. It is possible to create up to 250 customers.
6.1. Manage a customer
➢ Turn on the analyser.
➢ Go to “Customers” with the keypad then OK.
➢ Press the “Add” function key.
“Add customer” screen is displayed.
➢ Press OK on “Name” line.
The keyboard appears.
➢ Enter the customer name with the keypad and press OK to validate the letters.
➢ Press the “OK” function key.
The analyser backs to “Add customer” screen.
➢ Go to the 1
st
line of the address with the keypad then press OK.
➢ Enter the 1
st
line of the customer's address with the keypad and press OK to validate letters.
➢ Press the “OK” function key.
The analyser backs to “Add customer” screen.
➢ Go to the 2
nd
line of the address with the keypad then press OK.
➢ Enter the 2
nd
line of the customer's address with the keypad and press OK to validate letters.
➢ Press the “OK” function key.
The analyser backs to “Add customer” screen.
➢ Continue for both following lines of the address if necessary.
➢ Go to “Phone” line with the keypad then press OK.
➢ Enter customer's telephone number with the keypad and press OK to validate the numbers.
➢ Press the “Save” function key.
The analyser backs to “Customer List” screen with the created new customer.
When a customer has been created, it is possible to link to this customer one or several boilers. See page 24 to create, modify and
delete a boiler.
6.2. Modify a customer
“Customers” screen is displayed.
➢ Go to the customer to modify with the keypad then press OK.
➢ Press the “Detail” function key.
Details of the customer are displayed.
➢ Press the “Modify” function key.
➢ Go to the line to modify with the keypad then press OK.
The keyboard appears.
➢ Make the changes.
➢ Press the “Save” function key to validate.
The analyser backs to “Customer detail” screen.
➢ Press the “Save” function key once all the changes have been made.
6.3. Delete a customer
“Customer” screen is displayed.
➢ Go to the customer to delete with the keypad then press OK.
➢ Press the “Delete” function key.
A message appears asking to confirm the deletion of the customer.
➢ Go to YES then press OK to confirm the deletion.
➢ Go to NO then press OK to cancel.
Manage customers 23