7. Manage boilers
A boiler is compulsorily linked to a customer, at least one customer must be created to create a boiler. See page 23 for the creation of a
customer. It is possible to link up to 10 boilers per customer.
7.1. Create a boiler
The list of customers saved in the analyser is displayed.
➢ Go to the customer which will be linked to the boiler with the keypad then press OK.
➢ Press the “Add” function key.
➢ Press OK on “Model” line.
The keyboard appears.
➢ Enter the model of the boiler with the keypad then press OK to validate the letters.
➢ Press the “OK” function key to validate the model.
The analyser backs to “Add boilers” screen.
➢ Do the same for “Brand”, “Address”, “Location” and “Air pulsed burner”.
➢ Press OK on “Tightness” line, select “B Type” (untight) or “C Type” (tight) then press OK.
➢ Press OK on “Combust.” line, select the type of combustible for the boiler then press OK.
➢ Press OK to tick the “Air pulser burner” box if the boiler has one.
➢ Press the “Save” function key to save the boiler features.
The analyser backs to the list of boilers.
7.2. Modify a boiler
The list of boilers saved in the analyser is displayed.
➢ Go to the boiler to modify with the keypad then press OK.
➢ Press the “Detail” function key.
Details of the boiler are displayed.
➢ Press the “Modify” function key.
➢ Go to the line to modify with the keypad then press OK.
The keyboard appears.
➢ Make the modifications.
➢ Press the “Save” function key to validate.
The analyser backs to “Modify boiler” screen.
➢ Press the “Save” function key once all the changes have been made.
7.3. Delete a boiler
The list of boilers saved in the analyser is displayed.
➢ Go to the boiler to delete with the keypad then press OK.
➢ Press the “Delete” function key.
A message appears asking to confirm the deletion of the boiler.
➢ Go to YES then press OK to confirm the deletion.
➢ Go to NO then press OK to cancel.
24 Manage boilers
To Next Page
Loading...
