Kioti CK2810 - Using Power Steering and 3-Point Hitch

OPERATION
5
5
-
19
M52O531A
1. The power steering function is acti-
vated only while the engine is run-
ning. However, the steering wheel
becomesslightlydifcultwhenthe
engine is running at a low speed.
The steering wheel can be operat-
edbutbecomesverydifcultwhen
the engine is stopped.
2. If you operate the steering wheel
with the tractor loaded, using an
implement or loader, the steering
When transporting the trac-
tor with a truck, fix the trac-
tor firmly onto the truck and
be aware of the height of the
loaded tractor to avoid hitting
the ceiling of a tunnel or the
bottom of a bridge.
Make sure to follow this in-
struction as such accidents
frequently happen.
•
•
WARNING
(1) Power Steering Handle
PRECAUTIONS WHEN USING POW-
ER STEERING
wheel operation can be somewhat
difcult.Operatethesteeringwhile
tractor is in motion.
3. When a loader is mounted, adjust
the air pressure of the front wheel
to its maximum specification and
mount weight or implement on the
3 point hitch of the tractor, and re-
move the front weight to make the
front and rear balance more stable
for safe working.
4. When turning the steering wheel to
its end, the operating sound of the
safety valve (relief valve) can be
heard. Do not continue to operate
the steering wheel to a maximum
right or left turn when you hear the
relief valve. (OK for a short period
of time). The temperature of the
hydraulic fluid may rise, causing
malfunctions.
M56(TB110)(CK2810)-호주판-OM-05.ind19 19 2012-10-15 오후 5:34:40