When driving on downhill with an
empty bucket and rear ballast in-
stalled, keep the rear ballast toward
the higher level of the ground. In
other words, drive backward on uphill
and forward on downhill.
Use the 4WD to increase friction
when driving on a slope with a load-
ed bucket and rear ballast installed.
Set the bucket and implement high
on a rough surface so that they are
not caught by obstacles.
When parking the tractor which is
equipped with a loader or backhoe,
make sure that the loader or the
boom of the backhoe is lowered on
the ground.
Otherwise, the tractor can become
unstable, leading to an unexpected
accident, such as roll over.
PARKING WITH LOADER INSTALLED
M55O625A
JOYSTICK LEVER
To Next Page
