6. If tension is incorrect, loosen the
alternator mounting bolt and hinge
bolt. Pull the alternator outward
using a pry bar to reach the proper
belt tension.
7. Replace the fan belt if it is dam-
aged, cracked or worn.
M56O721A
A deection between
7 ~ 9 mm (0.28 ~ 0.35 in.) when the belt
is pressed in the middle of the span.
-
fore checking belt tension.
•
CAUTION
Mishandling the battery shortens the
service life and adds to maintenance
costs. If the battery is insufficiently
charged, the headlights may dim and
the engine is hard to start. It is impor-
tant to inspect the battery periodically.
1. The battery cable should always
be clean and firmly connected.
When installing a new or used bat-
tery, clean its terminals.
2. Check the battery and cable for
damage and corrosion.
(1) Battery
PRECAUTIONS FOR HANDLING
4. In order to set the belt tight, move
the upper part of the alternator
backward.
5. Apply moderate thumb pressure to
the belt between pulleys.
-
furic acid that can burn you.
Do not allow the battery fluid
-
dentally get it in your eyes or
and contact your doctor.
while working on the battery.
eyes.
Use only the battery with the
•
•
•
•
WARNING
3. Apply grease to the terminals and
cable end in order to prevent cor-
rosion.
To Next Page
Loading...
