3. After cleaning you should reas-
semble the new filter element,
making sure that it is free from dust
and dirt. Assure that all O-rings are
in place.
4. Bleed the fuel system. (Refer to the
instructions for bleeding the fuel
system in the inspection section)
Make sure that no foreign ma-
terials enter the fuel system.
Before disconnecting any con-
-
erly.
•
•
CAUTION
If dust and dirt enters the fuel
-
odically.
•
IMPORTANT
Make sure to bleed the system un-
1. When the fuel filter or line is re-
moved.
2. When the tank is completely empty
3. When the tractor is not in use for
an extended period of time.
1. Make sure that the amount of fuel
in the fuel tank is sufcient.
(1) Fuel Cock
(A) Close (B) Open
(C) Air Bleeding
S35O701A
(1) Fuel Cock (2) Fuel Filter Head
(3) O-Ring (4) Filter Element
(5) Screw Ring
(A) Close (B) Open
196OA27C
The fuel lter is installed under right
rear fender.
1. Close the fuel cock and clean ther
area around the lter bowl.
2. Remove the filter after disengag-
ing the ring and removing the lter
bowl.
To Next Page
Loading...
