1. Turn the key switch to "ON", check
the amount of fuel by fuel gauge.
2. If the needle on the fuel gauge is
close to "E" or the fuel level is low,
open the fuel tank filler cap and
add fuel.
3. After adding the fuel, close the fuel
tank ller cap.
1. Park the machine on a at surface,
lower the implement.
get into the fuel system.
Be careful not to let the fuel
necessitating bleeding before
next engine start.
-
-
ing overnight.
If unit is not used for a long
-
cosity is suitable for the cold
weather.
•
•
•
•
•
IMPORTANT
Do not smoke while refueling.
Add the fuel in a well-ventilat-
ed area.
-
fore refueling.
Dirt or sand contained in fuel
strainer when refuelling.
•
•
•
•
CAUTION
CHECKING TRANSMISSION FLUID
(1) Gauge (2) Oil Filler Plug
(A) Oil level is acceptable within range
M56O744A
To Next Page
