1. To drain the used oil, remove the
right and left drain plugs and lling
plug at the front axle case and drain
the oil completely into the oil pan.
2. After draining reinstall the drain
plugs.
3. Remove the oil level check plug on
the left of the front axle.
4. Add new oil to the specied level
of the check plug through the oil
ller. (Refer to "Lubrication" in the
chapter "Service")
5. Tighten the oil filler plug after re-
plenishment.
6. Check the oil level in 15 minutes
and add oil as necessary.
1. Depress each brake pedal to mea-
sure its free play.
2. If the difference between the mea-
sured values is over the specied
range, adjust the pedals to the
standard using the bolts.
- Tighten the mounting nuts rmly
after adjustment.
(1) Brake Rod (2) Turn Buckle
(A) Free Play
PROPER BRAKE PEDAL FREE PLAY
196OA30C
3.67 L (0.97 U.S.gal)
25 ~ 40 mm (1.0~1.5 in.) on the pedal
(1) Check Plug (2) Oil Filler Plug
(3) Drain Plug
M56O712A
To Next Page
Loading...
