COMBINATION SWITCH
The combination switch consists of
the head light, turn signal light, and
horn switches. Its function by its po-
sition is as follows:
• OFF : Head light and tail light OFF
• : Low beam and tail light ON
• :
Turn signal light and tail light ON
(1) Turn Signal Light Switch
(2) Head Light Switch
(3) Horn Switch
M56O405A
(1) Head Light Switch
(A) OFF (B) Head Light ON
HEAD LIGHT SWITCH
The head light switch can be oper-
ated only while the key switch is in
"ON " position. Turning the head light
switch to the position "B" turns on
the instrument panel illumination and
head lights.
TURN SIGNAL LIGHT SWITCH
(1) Turn Signal Light Switch
(A) Right Turn (B) Left Turn
M56O407AM56O406A
The turn signal lights are used when
turning the vehicle left or right. Pull-
ing the lever up blinks the right turn
signal light while pushing the lever
down blinks the left turn signal light.
The turn signal light lever is not
the self-return type. Therefore,
make sure to return the lever
manually after turning the vehicle.
The turn signal lamps can be op-
erated without the key inserted.
•
•
NOTE
Driving with high beam head
light disturbs the approach-
ing vehicle’s visibility for safe
driving. Use the high beam
head lights only if necessary.
•
WARNING
To Next Page
Loading...
