Always maintain the proper tire ination pressure. Make sure the tire pressure
does not exceed the pressure recommended in the manual.
INFLATION PRESSURE
T46w031A
Do not weld or apply heat to the
tire rim or disc. The tire can
explode due to the rapidly in-
creased pressure in the tire.
Check tires for ination pres-
sure, damage, deformation,
and excessive wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
•
•
WARNING
Class Tire Sizes Ination Pressure
Front 7-12, 6PR 225 kPa (2.3 kgf/cm
2
, 32.7 psi)
Rear 11.2-16, 6PR 216 kPa (2.2 kgf/cm
2
, 31.3 psi)
Keep the front tire pressure to maximum when using the front end loader
or front suitcase weights.
If tires with a different size from the ones already in use are installed, con-
tact the KIOTI dealer for the front/rear wheel speed ratio. Improper front/
rear wheel speed ratio can result in excessive wear of the tires, and can
cause damage to the front axle and transmission.
•
•
NOTE
To Next Page
Loading...
