Kioti CK2810 - Engine Troubleshooting

5
-
3
운운 운운
MX70/MX80/MX90/MX100
5
-
2
CK2810 / CK3010H
9
-
2
5
-
3
운운 운운
MX70/MX80/MX90/MX100
5
-
2
caUSE cOUNTERmEaSURES
1. When engine is difcult to
start

Fuel is thick and doesn’t ow.

Check the fuel tank and fuel lter.

Remove water, dirt and other impurities.

All fuel will be ltered by the lter, if there should be water of
other foreign material on the lter, replace the lter.

Air or water mixed in fuel sys-
tem.

If air is in the fuel lter or injection lines, the fuel pump will
not work properly.

To attain proper fuel injection pressure, check carefully for
loosened fuel cap nut, etc.

Loosen air vent screw over fuel lter and fuel injection pump
to eliminate all the air in the fuel system.

Thick carbon deposits on
orice of injection nozzle.

This is caused when water or dirt is mixed in the fuel. Clean
the nozzle injection piece, being careful not to damage the
orice.

Check to see if nozzle is working properly or not, if not,
install a new nozzle.

Valve clearance is wrong

Valve out of adjustment. (Cold engine)

Contact KIOTI dealer.

Engine oil become thick in
cold weather and engine
cranks slow.

Change grade of oil according to the weather (temperature).
This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems.
For more detailed service items, contact your local KIOTI Dealer.
ENGINE TROUBLESHOOTING
M56(TB110)(CK2810)-호주판-OM-09.ind2 2 2012-10-16 오후 3:00:36